418-22-12460 4182212460 Cassette Oil Seal / Wheel Oil Seal For Komatsu WA180 WA200 WA200PZ WA250 WA250PZ WA270
| Product Name | Cassette/Wheel Oil Seal |
| Model Number | 418-22-12460 4182212460 |
| Material | PU, Rubber, PTFE, NBR, HNBR, ACM, VMQ |
| Place of Origin | China(Mainland) |
| Brand name | SUNCAR |
| Packing | PP bag inside, carton box outside |
| Shipping Mode | By air, by sea, by express(FedEx, UPS, DHL, TNT, etc.) |
| Payment Terms | Western Union, Paypal, T/T, Transfer |
| CertifiC.A.Tion | ISO9001 |
| Warranty | Unavailable |
| Customized | OEM & ODM are welcomed |
| C.A.Tegory Group | Hydraulic Oil Seal, Oil Seal Kits |
| Condition | New, genuine new |
| Sample | Available |
| Applicable Industries | Building material shops, machinery repair shops, retail, |
| construction work... |
| Feature | High sealing performance, wear resistance, heat resistance |
Parts on group :
| Pos. | Part No | Qty | Parts name | Comments |
| | 418-22-30050 | [1] | Axle Assembly,Front Komatsu China | |
| | 418-22-32020 | [1] | Final Drive Assembly,L.H.,Front Komatsu China | |
| 1 | 418-22-32531 | [3] | Gear Komatsu China | |
| 2 | 417-22-22810 | [6] | Bearing, Cone Komatsu | 0.26 kg. |
| 3 | 418-22-32611 | [1] | Carrier Komatsu China | |
| 4 | 418-22-32810 | [1] | Holder Komatsu | 0.8 kg. |
| 5 | 419-22-12510 | [3] | Shaft Komatsu | 0.723 kg. |
| 6 | 419-22-12570 | [3] | Pin Komatsu | 0.009 kg. |
| 7 | 418-23-32961 | [1] | Shaft Komatsu | 51 kg. |
| 7 | 418-23-32960 | [1] | Shaft Komatsu | 51 kg. |
| 8 | 418-22-12840 | [1] | Bearing Komatsu China | |
| 9 | 418-22-12850 | [1] | Bearing Komatsu | 1.37 kg. |
| 10 | 418-22-12460 | [1] | Seal Komatsu China | 0.27 kg. |
| 11 | 418-22-32542 | [1] | Gear Komatsu China | |
| 11 | 418-22-32541 | [1] | Gear Komatsu China | |
| 12 | 417-22-12580 | [3] | Pin, Dowel Komatsu | 0.05 kg. |
| 13 | 01438-02000 | [1] | Bolt Komatsu China | |
| 14 | 418-22-21460 | [2] | Shim, T=0.05mm Komatsu | 0.1 kg. |
| 14 | 418-22-21470 | [2] | Shim, T=0.2mm Komatsu | 0.1 kg. |
| 14 | 418-22-21480 | [2] | Shim, T=0.5mm Komatsu | 0.1 kg. |
| 15 | 418-22-32421 | [1] | Shaft Komatsu China | |
| 16 | 418-22-33720 | [1] | Housing,L.H. Komatsu China | |
| 17 | 417-22-23250 | [1] | Plug Komatsu China | |
| 18 | 07002-13034 | [1] | O-ring Komatsu China | 0.005 kg. |
Product Show:
Our Services:
1. We will respond to your inquiry shortly.
2. We provide competitive price and high quality products.
3. Professional staff will help you solve product problems.
4. We can design mold opening according to customer needs.
5. We mainly produce seals& rubber products.
6. 100% quality control, 100% full inspection before packaging to ensure zero defect.
7. We can provide you with OEM services with your own trademark.
8. Good after-sales service, please contact me if you have any questions.
9. Looking forward to your inquiry.
| We can supply you all kinds of Hydraulic seal kits |
| |
| 1. ARM CYLINDER SEAL KIT |
| 2. BOOM CYLINDER SEAL KIT |
| 3. BUCKET CYLINDER SEAL KIT |
| 4. CENTER JOINT SEAL KIT |
| 5. TRACK ADJUSTER SEAL KIT |
| 6. MAIN PUMP SEAL KIT |
| 7. TRAVEL MOTOR SEAL KIT |
| 8. SWING MOTOR SEAL KIT |
| 9. LEVER SEAL KIT / PILOT VALVE SEAL KIT |
| 10. REGULATOR VALVE SEAL KIT /PLUNGER PUMP SEAL KIT |
| 11. CONTROL VALVE SEAL KIT |
| 12. GEAR PUMP SEAL KIT |
| 13. PUMP GASKET |
| 14. TRANSMISSION SEAL KIT |
| 15. BREAKER HAMMER SEAL KIT |
Measures For Oil Leakage Due To Inadequate Oil Seal:
1. Master and recognize the basic knowledge of fake and inferior products, and purchase high-quality and standard oil seals.
2. During installation, if the roughness of the outer surface of the shaft diameter is low or there are defects such as rust, burrs, etc., smooth it with a fine emery cloth or whetstone; apply clean engine oil or grease to the lip of the oil seal or the corresponding position of the shaft diameter. Apply sealant to the outer ring of the oil seal, wrap the key way on the shaft with hard paper to avoid scratching the lip of the oil seal, and use a special tool to rotate and press the oil seal inwards. Do not smash the hard seal to prevent deformation of the oil seal or squeeze the spring and fail; If there is lip cuffing, the spring falls off and the oil seal is skewed, It must be removed and reinstalled. It should be noted that when the shaft diameter is not worn and the spring force of the oil seal spring is sufficient, do not tighten the inner spring without authorization.
3. The oil seals applied to machinery generally have to be inspected, maintained and maintained when the general working conditions are poor, the ambient temperature difference is large, the dust is excessive, and the vibration of the machine tool frequently changes the stress condition of the machine parts.
4. If the shaft diameter and bearing are seriously worn; The rubber seal oil is aging or the spring is invalid, etc., repair and replace the corresponding parts in time.
Product Tags:
|
|
418-22-12460 4182212460 Cassette Oil Seal / Wheel Oil Seal For Komatsu WA180 WA200 WA200PZ WA250 WA250PZ WA270 Images
|
